|
Maintainer MTS 6-1-084 Service
Body |
|
|
-Standard Features - |
|
|
|
|
|
- Galvannealed body to resist corrosion including body shell (12 ga),
bulkhead, wheel skirting and all exterior sheeting / Aluminum doors
(3/16" thick) |
|
|
|
- Cabinet floor reinforcement w/ clean-out drains |
|
- Three point composite D-ring door latches w/ gas shock door
holders |
|
- Adjustable shelving package |
|
- 49" Wide center deck overlaid with deck plating |
|
- 10" Swing-down tailgate |
|
- 12" Deep, full body width, step bumper w/ 2" square frame hitch
receiver Class IV |
|
- Fuel fill recessed into body side rail (1-ton only) |
|
- Body primed and undercoated |
|
- I.C.C. round recessed lights, reflectors, mud flaps and rear body
grab handles |
|
- Mini I.C.C. Safety kit - 2 1/2 pound ABC fire extinguisher &
hazard reflectors |
|
MTS-1-084, 52" High X 23" Deep Compartments, 11' Long Body, |
|
12 Ga. body, 44" x 21" wheel well opening / installed on chassis |
|
Adder for 1 or 2 ton service body "Tall Tower Crane" |
|
reinforcement structure of body |
|
|
|
All cranes include a closed center load sensing hydraulic power
package consist |
|
of a PTO, pump, oil reservoir w/ in-tank filter-vented fill cap -
sight gauge - suction |
|
screen & gate valve, 25 foot remote control, hydraulic extend boom,
anti-two block |
|
system, hydraulic overload protection, holding valves and
proportional trigger |
|
control, adjustable boom saddle and body spring leveling package
(note if air |
|
suspension customer will be required to have chassis OEM to provide
dual-control) |
|
|
|
3824 Crane 6,350 lb. max. capacity w/ hydraulic extend boom 10' to
24' |
|
w/ 2 - rear hydraulic up/down & 1 - manual out crane side
outriggers |
|
|
|
- Crane Equipment & Accessories - |
|
Engine start/stop control on remote pendent |
|
|
|
- Chassis Equipment & Accessories - |
|
Electric back up alarm - 97 db at 1 meter |
|
Electronic engine spd. control: Ford 350, 450, 550, 650 w/ 6.0L or
7.3L |
|
|
|
- Compressor Equipment & Accessories - |
|
Vmac VR-70 Engine driven compressor 70 CFM |
|
Air accessory package - filter / lubricator / regulator |
|
1/2" X 50' spring rewind reel, hose & ball stop |
|
Hose reel access out rear compartment |
|
Air reel to be plumbed to compt. back wall for dealer supplied &
installed comp. |
|
|
|
- Compartment Equipment & Accessories - |
|
Tall Oxy/Act bottle storage w/ratchet strap, vents, "J" hks. & re/flr. |
|
2-blowers w/filters for pressurized storage system (PSS) |
|
|
|
- Lighting Equipment & Accessories - |
|
Exterior 12 v. lighting pkg. (halogen) 1-permanent & 1-remote |
|
Interior 12 v. strip light |
|
|
|
- Painting Equipment & Accessories - |
|
Paint body complete - one solid urethane color |
|
Note: Due to variations in OEM paint products and application
methods, |
|
Maintainer cannot guarantee a perfect paint match on colors or
metallics. |
|
Note: For metalics or clear coat/base coat paint additional
charges |
|
will be required and are not included in this quote unless shown |
|
Line-X protective spray covering - cargo area, compartments, |
|
bumper and/or workbench area |
|
|
|
- Roll-out Drawer and Tray Equipment & Accessories - |
|
EZ Latch Aluma (5) drawer std. set (125 lb. cap. Ea.) 18"W x 18"D x
(5)-4"H, |
|
overall height 29" / 1 F-B divider & 4 S-S adj. Dividers |
|
EZ Latch Aluma (7) drawer HD set (250 lb. cap. Ea.) 29"W x 18"D x
(1)-6", |
|
(1)-5", (5)-4"H, overall height 40.5" / 2 F-B dividers & 6 SS
adj. Dividers |
|
|
|
- Center Deck Equipment & Accessories - |
|
4 - Flush mount "D" ring tie-downs in bed floor |
|
|
|
- Rear Bumper Equipment & Accessories - |
|
26" workbench bumper with 2-side storage compartments includes |
|
2" square frame hitch receiver and round recessed tail & marker
lights |
|
Transverse bar storage compt. in workbench bumper |
|
|
|
- Miscellaneous Equipment & Accessories - |
|
Vise / grinder removable mounting plate |
