Truck Equipment is beginning our annual 2026 summer seasonal hours. We will be open Monday-Friday from 7:30 a.m. to 4:30 p.m. starting Tuesday, May 26th. Thank you for your understanding and we look forward to seeing you.

The snowy season is off to a strong start this year. It's crucial that you inspect, service and clean your snow removal equipment as early in the season as possible to avoid higher repair and maintenance costs in the future. Here are some helpful tips to ensure your equipment is ready to work all season long. SNOWPLOW MAINTENANCE Replace all damaged or worn parts. Check all fasteners: with regular usage, they may become loose, so tightening them up is necessary. Check cotter pins and welds: read your owner's manual for instructions on how to do this properly. Adjust trip springs: you must adjust the trip springs to confirm they are set correctly. You should be able to slide a piece of paper between the second and third springs. Look the plow over for areas that may need to be greased. Greased areas may differ depending on the plow. For example, the Western PRODIGY has two areas. Cutting edges should be inspected for uneven wear: the length of the cutting edge should depend on the driver's experience, ground surface type, etc. If it is worn too far, it will begin to wear on the actual blade. Check electrical routing and connections for bends, rubbing, or cuts; replace or adjust these prior to usage as needed. Add dielectric grease to all connectors: this will prevent corrosion and attain a proper seal. If this is not done, it could be costly down the road. Check all hydraulic hoses for leaks, cracks or damages. Also, verify that they are hooked up correctly. Drain and replace hydraulic fluid in the unit yearly. This will ensure the quality of the fluid is always at its best. Verify all snowplow functions are working properly, including the raise, angle left, angle right, and lower. Ensure headlamps are providing ample illumination. Test the battery and charge or replace if needed. Make sure the plow mount is correct. Ensure your vehicle is properly maintained as well. Ensure oil changes are performed, and the brakes, etc. are all in working condition. SPREADER MAINTENANCE With the hopper spreader in the upright position, lubricate the bed chain and ensure that it is set to the proper tension by grasping the bed chain and checking for one to three inches of chain deflection. Once the spreader is in the vehicle, attach the shoot (check your manual for proper positioning). Bolt it to the frame of the vehicle. Make sure bearings are greased on the spreader and chute and lubricate before each use. Change gear oil in gear box annually to prevent buildup of moisture in the gear box. Check the drive motor chain to ensure it is lubricated and set to the proper tension. Under the hood of the vehicle, verify the power cables are installed directly to the battery. Ensure the terminals are clean. Inspect the 100 amp fuse and apply dielectric grease. Inspect harnesses to ensure they are well-secured and remain away from hot or moving components. At the rear, ensure electrical harnesses are routed free from sharp edges, heat source, and moving parts. All connectors should be checked for damage or corrosion. In season, apply dielectric grease after each use. Inspect electrical connections to ensure they are tight. Test run your hopper spreader to ensure it's running properly. Visit www.westernplows.com for more information on preseason maintenance on Western equipment, and www.snowexproducts.com for information on SnowEx plows and spreaders. Happy winter season!

The 2025 holiday season is quickly approaching. Here are our special hours for the upcoming holidays. THUR. 11/27 | CLOSED FRI. 11/28 | CLOSED SAT. 11/29 |   8 a.m. - noon WED. 12/24 | 7:30 a.m. - noon THUR. 12/25 | CLOSED THUR. 01/01 | CLOSED Thank you for your understanding, and have a safe, happy holiday season.

We can't believe the 2024 year is coming to a close. We are so grateful to all of our staff members and customers that have supported us this year. In observance of the holiday season, please see our holiday hours below. Tuesday, 12/24 | 7:30 a.m. to noon Wednesday, 12/25 | CLOSED Wednesday, 01/01 | CLOSED Thank you for your understanding. Enjoy the holiday season and make the most of the rest of the year.

The 2023 holiday season is here. We hope you all are able to celebrate with loved ones this year. Here are our holiday hours: Friday, 12/22 | 7:30 a.m. to 2:30 p.m. Saturday, 12/23 | CLOSED Monday, 12/25 | CLOSED Monday, 01/01 | CLOSED Thank you for your understanding. We hope to see you in soon.

All of us at Truck Equipment, Inc. wish you and your loved ones a very happy Thanksgiving holiday. We are immensely grateful for all of your support this year. In observance of the holiday and to give our employees time to celebrate this holiday with their loved ones, our hours this week are as follows: Thursday, 11/23 | CLOSED Friday, 11/24 | CLOSED Saturday, 11/25 | 8 a.m. to noon We appreciate your understanding.

RAGBRAI 2023 has begun and this year, the route is going directly through Des Moines. Due to our business being on a dead end, and NE 14th closing for the ride, we made the decision to close for the day on Wednesday, July 26th. We will reopen on Thursday, July 27th for normal business hours. Please contact us with any questions you may have, and thank you for your understanding.

We will be closed on Tuesday, July 4th, in observance of the holiday. We will reopen on Wednesday, July 5th at 7:30 a.m. to resume normal business hours. Thank you for your understanding, and have a wonderful 4th of July holiday.

The holidays are among us. Here are our hours for this season. Thank you for your understanding during this time. We appreciate it. As always, remember you can buy parts online and pick up in store for free. THANKSGIVING Thursday, November 24 | CLOSED Friday, November 25 | CLOSED CHRISTMAS Monday, December 26 | CLOSED NEW YEAR Monday, January 02 | CLOSED

Truck Equipment is hiring multiple Truck Accessory & Equipment Installers. Check out the listing details below and apply today to join our team. This person will be required to install service bodies, platforms, dumps and van packages, hoists, electrical components and circuits, cranes, aerial lifts, snowplows, ladder racks and other light mechanical assembly. ​ Truck Accessory and Equipment Installer Expectation Statements: This person will need to read work instructions and installations directions, gather materials, properly build the equipment, and test its performance before delivering the unit to a final product audit. ​ Truck Accessory and Equipment Installer Essential Duties and Responsibilities: Ability to read schematics, diagrams and blueprints Meet production standards Strong mechanical background Ability to work independently and in a team environment Able to provide own tools Positive attitude and willing to learn Progressive assembly line capabilities Work safely in a production environment wearing Personal Protective Equipment (PPE) when required Regular and predictable attendance Ability to interact with others ​ Preferred Experience and Training: Previous work in an assembly environment Previous experience working against timed job standards and a proven record of being able to meet completion standards Attention to detail in every aspect of the job Able to maintain a neat, clean and organized work area ​ Equipment, Tools Used to Perform the Essential/Preferred Duties and Responsibilities: Hand tools - pneumatic and battery operated Cutting torch Overhead cranes Grinders Plasma Cutter Welders Physical Requirements: Normal standing, walking, bending and twisting as necessary to perform job duties Use of hand tools Exposed to normal seasonal temperatures Lifting/moving up to 75 pounds ​ Education Requirements: High School or GED ​ Type: Full-time ​ Salary: $20.00 - $28.00 per hour ​ Benefits: Health insurance Paid time off ​ Schedule: 8 hour shift Monday to Friday Overtime Weekend availability ​ Supplemental Pay Types: Bonus pay ​ Ability to Commute/Relocate: Des Moines, IA 50313: Reliably commute or planning to relocate before starting work (Required) ​ Experience: Auto/Truck Mechanical: 1 year (Required) ​ Language: English (Required) ​ Work Location: One location Send resumes to info@truckequipmentinc.com.

It's almost time! 2022 Annual Snowplow Days is returning, and online registration opens soon. Beginning at 7 a.m. on Wednesday, September 28th, you can register online for Central Iowa's premier snow removal industry event. The first 100 registrants will receive a 16 oz RTIC travel mug. Additional benefits to registering online include skipping the registration line the day of and a better chance of guaranteeing the correct size t-shirt. 2022 Annual Snowplow Days highlights include: Free oil changes for plows purchased from Truck Equipment, Inc. Free lunch for all attendees Free t-shirt for attendees (until supplies last) Special financing and offers Network with industry peers Converse with representatives from Western and SnowEx Check out new, innovative snow removal equipment Check out more information and register here.

We are excited to announce the return of Annual Snowplow Days. This year's event will be held Friday, October 14, 2022 from 11 a.m. to 4 p.m. Network with industry peers, converse with representatives from snow removal manufacturers, enjoy a free lunch and special financing options. Click here to learn more information about the day and sign up to receive an email invitation if you haven't subscribed already.