1.

PLOW BLADE CONSTRUCTION

The ENFORCER™ v-plow is constructed of high-strength, low alloy steel that makes it stronger and lighter than conventional steel, and the ideal weight for half-ton trucks. Available in premium, corrosion-resistant stainless steel or powder-coated steel, the 7'6" wide v-plow features wings that soar from a 27" center height up to 33" at the outer edge.

​

The blade comes standard with a 6", high carbon steel cutting edge, providing increased wear resistance and a clean scrape.

​

An aggressive, 70-degree attack angle enhances scraping and back dragging, making it ideal for asphalt and paved surfaces, and for scraping up ice and hard-packed snow.

3.

RELIABLE HYDRAULICS

We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.

​

Fully enclosed components are protected from the elements.

5.

DOUBLE-ACTING CYLINDERS

The double-acting cylinders allow operators to lock the wings together in order to control the v-plow in straight blade mode without having to adjust each wing independently. The wings also lock firmly in place for efficient back dragging capabilities. 

7.

HYDRAULIC COVER

The fully enclosed hydraulic cover protects the hydraulic unit from the elements and does not require any tools to remove.

2.

STRUCTURAL REINFORCEMENT

The ENFORCER™ v-plow features six vertical ribs, plus two additional horizontal ribs on the stainless steel model, which reinforce the blade for structural integrity and exceptional torsional strength.

​

A 3/4"-diameter, heat-treated steel center pin resides within a three-connection-point hinge for added strength and rigidity.

4.

TRIP PROTECTION

Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop, or straight blade configuration, the trip edge helps protect the plow, the truck, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.

6.

STEEL CENTER GAP COVER

The ENFORCER™ v-plow comes with a snow deflector located over the center hinge. No matter which plow position you're in, you can count on a clean pass that reduces the amount of snow lost over the top.

8.

ADJUSTABLE WIDTH CONFIGURATION

Configures to varying vehicle heights in order to maintain optimum performance.

1.

ULTRAMOUNT® 2 SNOWPLOW MOUNTING SYSTEM

The UltraMount® 2 system is designed for fast and easy installation and removal using a simple mechanical system. It features a robust one-piece design and is 100% compatible with UltraMount® system mounts and electrical platforms.

3.

CONTROL OPTIONS

Choose between a CabCommand hand-held control with push buttons or a joystick control, based on operator preference. For efficient, precise and intuitive blade control while plowing, both controls feature power "on" and "float" LED lights, backlighting for night operation, and plug-in connector for easy removal.

5.

NIGHTHAWK™ HALOGEN HEADLAMPS

The new NIGHTHAWK™ dual-halogen headlamps, standard on all WESTERN truck plows, make the road more visible than ever before, keeping you safer on the job.

7.

ISOLATION MODULE

This advanced snowplow light and electrical system features improved electrical pins in the harness for trouble-free connections. An underhood module improves system life and complies with OEM requirements. No toggle switch needed to change from vehicle to plow lights.

9.

PRE-PUNCHED BLADES FOR ACCESSORIES

The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometime occur when installing an accessory.

2.

ULTRA FINISH™ BAKED-ON POWDER COAT

The ULTRAFINISH™ baked-on powder coat with epoxy primer is standard on all WESTERN plows, providing outstanding protection against wear and rust.

4.

FLEET FLEX ELECTRICAL SYSTEM

The FLEET FLEX electrical system provides true fleet interchangeability. The same CabCommand hand-held or joystick control can operate any UltraMount® and UltraMount® 2 mounted plow on any truck at any time.

6.

SECURITY GUARD™ ANTI-THEFT SYSTEM

The exclusive WESTERN® SECURITY GUARD™ snowplow anti-theft system is a safe and secure way to electronically lock your snowplow when it is detached from your truck as a deterrent from theft.

8.

CHAIN LIFT SYSTEM

The mechanical chain lift system offers a variety of performance and reliability advantages over a hydraulic system.

1.

BACK DRAG EDGE

Ensure a clean scrape, every time, when you back drag. Angled to maximize dragging, the WESTERN® back drag edge is constructed to be as rugged and durable as every other component of your plow. Easy to install and easy to use, a back drag edge is a key tool in any snowfighter's kit.

3.

POLY CUTTING EDGE

Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with poly cutting edge kits.

2.

RUBBER SNOW DEFLECTOR

Control the snow and always see where you're going with an optional deflector. The 10", 2-ply rubber snow deflector fits all ENFORCER™ v-plow blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.