1.
PLOW BLADE CONSTRUCTION
The MVP PLUS™ v-plow is available in 14-gauge powder-coated steel or 1/4" high-density polyethylene in 7'6", 8'6" and 9'6" widths.
​
The durable poly blade provides a slick surface for enhanced snow-rolling action and a maintenance-free surface. The steel blade features our high quality ULTRAFINISH™ powder-coated surface.
​
The 70-degree attack angle provides a clean scrape, and a high carbon steel cutting edge comes standard, reducing wear and extending the life of the blade.
3.
RELIABLE HYDRAULICS
We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.
​
Fully enclosed components are protected from the elements.
5.
DOUBLE-ACTING CYLINDERS
As a standard feature on the MVP PLUS™, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.
The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
2.
STRUCTURAL REINFORCEMENT
Six vertical ribs on the 7'6" models and eight on the 8'6" and 9'6" models, combined with the exclusive WESTERN® POWER BAR, provide exceptional torsional strength and rigidity to eliminate blade twisting.
​
The high-strength steel base channel provides extra support along the bottom of the plow blade.
​
At 1" diameter steel center pin resides within a three connection point hinge, keeping the wings tight for optimal performance.
4.
TRIP PROTECTION
Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop, or straight blade configuration, the trip edge helps protect the plow, the truck, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.
6.
STEEL CENTER GAP COVER
For the cleanest pass in any position, the MVP PLUS™ v-plow has a snow control deflector over the center hinge to help prevent snow from being lost over the top.
UNIVERSAL FEATURES
1.
ULTRAMOUNT® 2 SNOWPLOW MOUNTING SYSTEM
The UltraMount® 2 system is designed for fast and easy installation and removal using a simple mechanical system. It features a robust one-piece design and is 100% compatible with UltraMount® system mounts and electrical platforms.
3.
CONTROL OPTIONS
Choose between a CabCommand hand-held control with push buttons or a joystick control, based on operator preference. For efficient, precise and intuitive blade control while plowing, both controls feature power "on" and "float" LED lights, backlighting for night operation, and plug-in connector for easy removal.
5.
NIGHTHAWK™ HALOGEN HEADLAMPS
The new NIGHTHAWK™ dual-halogen headlamps, standard on all WESTERN truck plows, make the road more visible than ever before, keeping you safer on the job.
7.
ISOLATION MODULE
This advanced snowplow light and electrical system features improved electrical pins in the harness for trouble-free connections. An underhood module improves system life and complies with OEM requirements. No toggle switch needed to change from vehicle to plow lights.
2.
ULTRA FINISH™ BAKED-ON POWDER COAT
The ULTRAFINISH™ baked-on powder coat with epoxy primer is standard on all WESTERN plows, providing outstanding protection against wear and rust.
4.
FLEET FLEX ELECTRICAL SYSTEM
The FLEET FLEX electrical system provides true fleet interchangeability. The same CabCommand hand-held or joystick control can operate any UltraMount® and UltraMount® 2 mounted plow on any truck at any time.
6.
SECURITY GUARD™ ANTI-THEFT SYSTEM
The exclusive WESTERN® SECURITY GUARD™ snowplow anti-theft system is a safe and secure way to electronically lock your snowplow when it is detached from your truck as a deterrent from theft.
8.
CHAIN LIFT SYSTEM
The mechanical chain lift system offers a variety of performance and reliability advantages over a hydraulic system.
FEATURED ACCESSORIES
1.
BACK DRAG EDGE
Ensure a clean scrape, every time, when you back drag. Angled to maximize dragging, the WESTERN® back drag edge is constructed to be as rugged and durable as every other component of your plow. Easy to install and easy to use, a back drag edge is a key tool in any snowfighter's kit.
3.
CURB WEAR GUARDS
Go right up to the edge with bolt-on curb guards. Protect the outer edge of your snowplow from wear when plowing along sidewalks and curbs. Made of cast metal, each curb guard effectively protects the outer edge of the plow.
2.
PLOW WINGS
Get more jobs done faster with wings. These plow wings increase to overall plowing width by one foot, add up to 30% more carrying capacity, and minimize snow spill-off. Made of 12-gauge steel with high strength steel ribs, these durable wings attach quickly and easily with a single pin.
SPECIFICATIONS
* Does not include vehicle mount (28 lb to 145 lb weight range). Please refer to the Quick Match program for specific vehicle applications.